Boehmer Heating & Cooling Blog: Posts Tagged ‘Washington County’

Will Switching to Geothermal Save Me Money? A Question from Monroeville

Monday, November 7th, 2011

There are simply a ton of different types of heating systems you can have in your Monroeville home and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

When you are trying to assess whether or not switching to a geothermal heating system will save you money, you first have to start with the heating bills you currently have. Then, factor in the cost of the geothermal heat pump installation as opposed to the installation of a more conventional system.

You are then in a position to see whether or not the amount the geothermal system will save you each month is enough to offset the higher cost of installation within a reasonable amount of time. Of course, the savings will always eventually add up over time, but if the length of time it will take you to break even is the same or longer than the expected life of the system, it is probably not worth it to invest in this type of heating.

Continue Reading

Furnace Safety: Some Pointers from Gibsonia

Friday, November 4th, 2011

There are many advantages to a properly operating furnace in your Gibsonia home. The most important are the safety and comfort of a home’s occupants and the cost of running the furnace. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breath” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Continue Reading

Is Geothermal Energy Renewable? A Question From Finleyville

Monday, September 26th, 2011

Geothermal heating systems take heat from the ground and transfer it to your Finleyville home. But how does this heat get into the ground in the first place? Conventional heating systems like furnaces use energy sources like oil or natural gas to generate heat. These energy sources are not renewable, and neither is electricity which is typically generated by burning coal or another non-renewable resource.

The renewable resources we usually think of first are solar and wind power. The sun, of course, will continue to shine and provide heat year in and year out whether we make use of it or not. Similarly, we cannot use up the wind. It will continue to blow no matter how many times it has blown before.

But what category does geothermal energy fit into exactly? Well, it is actually a renewable resource just like solar or wind energy. In fact, geothermal energy is a direct result of the sun’s heat relentlessly pounding the ground. The ground actually absorbs a considerable amount of the heat from the sun that reaches the earth every day, and that is the heat that your geothermal heating system is using to heat your home.

Of course, a geothermal heating system cannot run on geothermal energy alone. The indoor components of this heating system that keep the air flowing throughout your house must be powered by electricity. But the amount of energy needed to do this is much less than what you would need to use to run a furnace or other type of more conventional home heating system.

Over all, geothermal energy is an excellent and renewable source of energy. And once you have the heating system in place, you will need to spend very little to keep it up and running. It is an excellent option for many people, and can help to keep your home cool in the summer as well.

Continue Reading

IAQ – To Zone or Not to Zone my Home Comfort: Some Pointers From Elizabeth

Friday, September 23rd, 2011

There are a lot of decisions to make related to your Elizabeth home’s comfort system. You must decide what type of heating you want, how you’ll implement air conditioning, and then how to keep all of that heated and cooled air clean and healthy in your home.

On top of everything else, you have the option to implement zone control in your house to provide multiple comfort levels for each member of your family. Zone control systems are growing rapidly in popularity because they allow home owners to enjoy an enhanced level of comfort throughout the day, while not negatively impacting any one person.

For example, if it’s chilly outside and you need to turn your heater on, that doesn’t mean everyone in the house wants the thermostat set to 72°F. There are a few reasons for this. You may be in the kitchen, working over the stove or doing dishes where there is plenty of heat to keep you warm. More warm air coming through vents or radiators isn’t going to make you comfortable.

The second floor of a home traditionally needs less heat because warm air on the first floor rises and fills that space. The same is true in the summer when cool air settles in lower floors. Having a zone control system allows you to set specific temperatures in each room which are then controlled by your home heating system. You can even turn off the heating and cooling in a specific room like your office or the attic if it will be empty for long periods of time.

Other Considerations

A zone control system is good for comfort, but also for the overall air quality of your home. Too much conditioned air moving through your ducts carries more allergens and contaminants into your home and causes your air quality system to work harder. Your ventilation system will be asked to work harder as well.

Ideally, a good home air quality system is designed to use as little conditioned air as possible to keep everyone comfortable. A zone control system does this very effectively. When talking to a professional about a new installation, check to find out about programmable thermostats as well. These can make it easier to set and forget the temperature in rooms that are only used for a few hours each day.

Continue Reading

Home Energy Myths: A Tip From Cranberry

Monday, September 12th, 2011

Measuring and controlling your Cranberry home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, like an Energy Star air conditioner, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. But there are some easy ways to conserve energy and if you need more information, contact your local HVAC professional.

Continue Reading

How to Add Freon to a Central Air Conditioning Unit: A Guide From Braddock

Wednesday, September 7th, 2011

An air conditioner cannot cool your Braddock home without an adequate amount of Freon. So if you’ve noticed a drop off in the cooling power of your central air conditioning system, inadequate Freon levels may be the culprit. But before you try to add more Freon to your unit, there are several things you need to know.

Low Freon Means a Leak

The truth is that your central air conditioning system should never need to be “topped off” with Freon. The coolant in your unit is part of a closed loop system and doesn’t get used up like fuel. Instead it continues to circulate through your compressor, absorbing and releasing heat to keep the air passing through it cool and comfortable.

If the level of Freon inside your air conditioner drops below the proper level, it generally means there’s a leak somewhere in your system and you’ll need a qualified professional to find that leak and make the necessary repairs.

Professional Access and Expertise

Even if you’re inclined to add Freon to your unit, you’ll probably have a hard time getting your hands on it. As an EPA regulated substance, Freon can only be purchased by EPA certified technicians. If you’re able to purchase this type of coolant for your air conditioner, you’ll need to make sure you know what type your unit uses. Most air conditioners these days use either R22 or R-134a. It’s important that you only use the type of Freon that your air conditioner is built for.

Potential for Harm

Freon is regulated so strictly because it is an extremely hazardous substance. It can harm you or your family and it can do a lot of damage if accidentally released into the atmosphere. To top everything off, if you do accidentally release it, you could be subject to some hefty EPA fines.

In extreme cases, you can do irreparable damage to your air conditioning system by trying to add Freon inappropriately or without proper training. For all of these reasons, it’s best to let a certified professional check and, if necessary, top off the Freon levels in your AC system. For the minimal cost of this service, you can avoid risking the health and safety of your family as well as that of your AC system.

Continue Reading

The Preventative Maintenance That Will Save You the Most

Friday, July 29th, 2011

Having a high performance, energy efficient HVAC system will save you a good deal of money in terms of your monthly heating and cooling bills. But that efficiency will not last unless you also take the necessary steps to keep your equipment in good working order. While regular maintenance visits from a professional HVAC technician are an important part of this, there are also several things you can do on your own to keep your equipment running at peak efficiency.

  1. Keep it Clear – The first thing you should do is to make sure that there is plenty of space cleared around your outdoor unit. Whether it is the condenser and compressor for your air conditioning system or part of your heat pump, that outdoor equipment needs to have plenty of space to vent hot air. Also, the space will mean that debris is less likely to develop inside the unit.
  2. Clean the Condensing Coil – While your technician will do this when they make their annual visit, it is best to clean your coil more than just once a year. Just make sure that the power is turned off to your unit before you begin. This will help the unit cool air more efficiently and can prevent a whole host of other problems from developing.
  3. Check on the Blower – If your blower is not working right or the blade is clogged, your HVAC unit will not work properly. Make sure your blower fan is free of all debris and that is turns freely once you have cleaned it. If you are still having a problem with it, you may have to call a technician for repairs. Cleaning the blower out on a regular basis, however, should keep this from becoming a problem you need a professional for.
  4. Air Filters – You should also make sure you change your air filters regularly. This can help to keep your indoor air clean and healthy and it will also enable your HVAC system to run more efficiently.
  5. Clean it Out – Clean out any debris that you can reach from any part of your system. Just make sure any time you work inside your HVAC system that you have all of the power turned off. Anything from leaves to dust can get in there and cause a problem if it is allowed to build up over time. As long as you are on top of things and keep to a regular schedule of maintenance, none of this should take you very long.

Continue Reading

Save with Maintenance on HVAC

Monday, July 18th, 2011

You can never save too much money by making improvements and taking steps around the house. Of course, it is hard sometimes to see exactly where the money saving opportunities are. That’s because you expect to spend a certain amount on various types of services when you own a home. You know you are always going to have heating and cooling bills, for instance. But are they higher than they need to be?

For many people, the answer to that question is “yes.” And it is not because they use their home heating and cooling systems inappropriately or because they have the wrong equipment. It is simply because they neglect to get their HVAC systems the regular care and maintenance that would keep them running at peak effectiveness and energy efficiency.

When your HVAC system is new, it runs well and can be remarkably energy efficient. However, over time that energy efficiency will gradually deteriorate. This drop off in efficiency is often not obvious at first, but if you compare your energy bills from the year you got your system to bills for the same time of year and same usage five years later, you will probably notice that the bill has gone up quite a bit, and not just because energy prices have gone up.

You can do a lot to prevent this loss of energy efficiency, though, if you simply have a professional HVAC technician come out once a year and give your system a tune up. During this type of maintenance service, the technician will check over your entire system looking for worn out parts and buildup that could be interfering with your system’s performance.

They can clean out any areas of your HVAC equipment that require it and they will be able to make any necessary repairs at that time. Often, a technician performing this type of maintenance will be able to catch minor issues before they are able to develop into bigger problems. And while you still have to pay for the maintenance visit, the cost is much less than what you would pay for an emergency repair.

It also represents a substantial savings over what you would be paying on your energy bills every month without it. Regular HVAC maintenance can preserve the vast majority of your system’s energy efficiency loss over time, and it is never too late to start. Even if it has been several years since you had your system installed, you will still be able to get back the vast majority of your original energy efficiency by starting with regular maintenance now.

Continue Reading

Save Money with Coupons

Wednesday, July 6th, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Continue Reading

Label Your Panel Box for an Emergency

Wednesday, June 22nd, 2011

During an emergency, moving fast is a priority. You need to get your family out of the house fast, but there are certain things you should have done well before the emergency that can help to keep you and your family safe. Specifically, if there is an earthquake, flood, or other major natural disaster that can disrupt your appliances or cause a sudden power surge, you want to turn off your electricity immediately, before anything can go wrong. Emergency workers might also need to access your panel box if you’re not home or if the area is too unsafe to enter.

Specific Instances this Might Matter

Think of what can happen if there is a flood in your basement and you need to go down to save your prized possessions or to stop the flow of water. Walking into a flooded basement with live electricity is incredibly dangerous. So, it’s important to know where your panel box is and what each of the breakers in it is for. This gives you the control necessary to stop the flow of electricity and stay safe, even when knee deep in standing water.

This also makes it possible for someone else to flip those breakers if you’re not home or there is a more urgent disaster like a fire or an earthquake. In the case of an earthquake, you never know when electrical supplies might be tripped or when your appliances will become disconnected from exhaust hoods or vents. Your gas is usually tripped off immediately by an earthquake shutoff valve, but your electricity needs to be manually stopped.

The Risk of Live Electricity

The key to effectively keeping your home operational through an emergency is to take every possible precaution until you can be sure that the space is safe. That means turning off key breakers, checking your home for disconnected appliances or potentially dangerous situations, and if necessary calling in an electrician to take care of any specific problems. In the case of most emergencies, if you’re not totally sure that something is safe, take precautions first by calling a professional and then worry about saving possessions and cleaning up.

Continue Reading