Boehmer Heating & Cooling Blog: Posts Tagged ‘Murrysville’

Is Your Furnace Making too Much Noise? (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Happy Halloween weekend from everyone at Boehmer Heating & Cooling! We hope you have a fantastically spooky time! But don’t be scared of the noises coming from your furnace, here is some information about common causes and solutions.

The old saying that “It is better to be seen than heard” certainly applies to the mechanical equipment in your Pittsburgh home. If you hear a squeaky noise or loud clattering you automatically suspect that something is wrong. And if that noise is coming from your furnace, you better pay attention to it. A noise is an obvious sign of a problem – minor or major – and it could result in mechanical failure that could leave your home cold and uncomfortable – and affect your home’s indoor air quality.

Today’s newer variable-speed furnaces keep a constant airflow through the ventilation system utilizing a low speed fan that consumes small amounts of electricity. Constant airflow brings in fresh air and keeps the room air from becoming stale or stagnant. Because of this constant operation, it is important to ensure the furnace is running at peak efficiency, which also means that it is running quietly.

Here are some common noises, possible reasons, and suggested repairs. As always, if you are in doubt about how to repair your furnace, call a local qualified heating contractor and schedule a service call.

  • Squealing noise – could be a worn out or slipping blower belt. Check for proper tension of the belt or replace the belt if it is worn out or cracked.
  • Squealing noise – could be worn out motor shaft bearings. Lubricate the blower motor at the proper points.
  • Rumbling noise – often caused by a poorly adjusted pilot light when the burners are turned off. Adjust the pilot as necessary.
  • Rumbling noise – often caused by dirty gas burners when the burners are switched on. This problem requires service from a qualified heating technician.
  • Buzzing noise – often caused when a blower motor mounting come loose. Tighten the mounting screws or use shims to fill gaps.
  • Hissing noise – indicates a possible air leak. This problem requires service from a qualified heating technician.
  • Ticking noise – possibly a leaky gas valve. This problem requires service from a qualified heating technician.
  • Rattling noise – could be a dirty fan blade. Wipe the fan blade or clean with degreaser.
  • Rattling, grinding, or whining – could be resistance to airflow that causes the motor to work harder. Check the vents in each room for dirt, debris, or obstructions and clear them.
  • Vibrating noise – may not be the furnace but loose or cracked seams in the ventilation system. Check the ductwork seams and hangers to ensure everything is tight. You may need duct tape or bracket hardware.

The best way to keep your furnace and ventilation system from making noises is to practice preventative maintenance. Have your furnace checked annually by a qualified heating contractor – and enjoy the peace and quiet.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Is Your Furnace Making too Much Noise? (and Happy Halloween Weekend!)

Things to Look for When Buying a Heating System: A Guide from Bridgeville

Monday, October 24th, 2011

If you are in the market for a new or replacement heating system in Bridgeville and don’t know much about heating systems, you are not alone. Many homeowners are in the same boat as you. And many of that number put their trust in their local, professional, and qualified heating and cooling contractor to find the right furnace for their homes.

Before calling for an estimate, there are some things you can do to “prepare” yourself for one of the most important purchase you can make. Here is a checklist of things you should look for when buying a heating system.

Know your energy alternatives. There are lots of options today when it comes to heating your home. Gone are the days when the choices were so cut and dried. Check with your heating and cooling contractor for suggestions.

  1. Know what size your furnace should be. Furnaces are not “one size fits all.” The size of the furnace is determined by its Btu (British thermal unit) rating. For example, a one-story ranch home on a crawl space requires less heating capacity than a two-story colonial with a basement, thus it would require a furnace with a smaller numbered Btu rating. A home with a great deal of heat loss through windows and doors may require various furnace sizes. And don’t forget about insulation. Insulation can affect the furnace size, too. Again, check with your heating and cooling contractor for recommendations.
  2. How much room do you need for your furnace? Some homes have mechanical rooms for furnaces and water heaters while others utilize attics, basements, or crawlspaces for furnaces. If you think you need a big furnace to heat a big home, think again. Furnace manufacturers have been downsizing their heating equipment for years, while maintaining the same heating capacities. One example are wall hung boilers, which utilize water and electric as heating sources and are installed on a wall, making the unit easy to locate and easy to service – while at the same time being off the floor and out of the way.
  3. Will your heating system be “plug and play?” New furnaces can take the place of the ones they are replacing by using the same space. But sometimes a replacement unit may need some altering to fit into an existing duct system. It is almost a given that a new plenum (the part attaching the furnace to the ductwork) will have to be fabricated. But the new furnace may also require some other modifications to an existing duct system. You should understand this ahead of time and be prepared to pay additional costs.
  4. A box is a box is a box. As a rule, most heating systems are made the same. In some cases, one furnace manufacturer may produce several different brand names. The best “brand” is the heating and cooling contractor who installs and services your heating equipment. Do your homework ahead of time and find a qualified and professional contractor. Ask friends and family for recommendations. This is may be the most important thing to look for when buying a heating system

Continue Reading

Tags: , , , ,
Posted in Heating | Comments Off on Things to Look for When Buying a Heating System: A Guide from Bridgeville

AC Maintenance: Why You Cannot Neglect It in West Mifflin

Monday, August 29th, 2011

Especially if you have just purchased a new air conditioning system for your West Mifflin home, maintenance is probably the last thing you are thinking about. In fact, if you are like most people, you do not think about your air conditioning system at all until it does not work when you need it. But if you simply continue to use your air conditioning system without maintaining it, you will be setting yourself up for a lot of problems later on.

Just like your car or any other machine that you run on a regular basis, your air conditioning system requires a regular tune up to keep it running like it is supposed to. The type of air conditioning system you have will dictate exactly how often this maintenance service needs to take place, but most systems benefit greatly from having a tune up once a year.

When you have just purchased an air conditioning system, the last thing you probably want to do is shell out a bunch of extra cash when the system is still running fine. But it really is much cheaper to pay now rather than waiting until you have a problem with your air conditioner to call for service.

During a regular maintenance visit, your technician will examine all of the component parts of your air conditioning system to make sure that they are working the way they should and not showing any signs of excess wear and tear. This is a great way to detect problems early, even when they have not yet begun to show in the air conditioner’s performance.

Your air conditioning technician will also thoroughly clean out your system to ensure that no excess debris is allowed to build up around the coil or other vital parts of the air conditioner. This is important because it helps the air conditioner to continue to function at peak energy efficiency levels. Without regular maintenance, your air conditioner will gradually lose efficiency over time. It will only lose a little bit every year, but if you do not do something to stop it, those little bits will quickly add up.

Regular maintenance also helps to prevent more costly and inconvenient repair visits later on. And it will certainly help to increase the lifespan of your air conditioner as well. Whether you have just purchased an air conditioning system or have had yours for several years, it is never too late to start your annual maintenance visits.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on AC Maintenance: Why You Cannot Neglect It in West Mifflin

How to Judge the Quality of a Ceiling Fan? A Question From Murrysville

Friday, August 5th, 2011

Like just about anything else on the market these days, there are good ceiling fans and there are low quality ones, even in Murrysville. With such a seemingly simple piece of equipment, it can be tempting to just grab the cheapest one you can find. After all, how much of a difference can it really make? In fact, the quality of the ceiling fan you buy can have a significant impact on its performance level and how long it lasts.

Of course, you do not necessarily want to go out and buy the most expensive thing you can find either. There are many good quality ceiling fans that will not cost you an arm and a leg, but you need to know how to find them and separate them from the rest of the pack.

One of the first things to look for when you are evaluating your ceiling fan options is how much of an angle the blades have. This angle usually ranges from eight to 15 degrees and the bigger the angle, the more air the fan can move at once.

However, cheaper fans with a less powerful motor cannot handle the resistance that a higher volume of air generates. What that usually means is that the units with the smaller blade angle are less powerful and will be less effective at circulating air throughout your room. Even when they are running at the same speeds, the blades with the smaller angle will move less air, and so they will not keep you as cool.

You should also check the various ceiling fans you are considering to make sure they are the right size to fit your room. To be safe, a ceiling fan’s blades should be no less than seven feet above the floor. But if you have very high ceilings, you may want to add something that can extend the fan down closer to the floor so that you will still feel all of the cooling effects it produces.

The various ceiling fans on the market right now all have many different features that can influence your decision as well. For instance, you may want to opt for a fan that has programmable settings or that comes with a remote control for more convenient access. But if these are not features you care about, you can probably save quite a bit by going with a no-frills model. For more information about what is right for your home, contact your local air conditioning professional.

Continue Reading

Tags: , , , ,
Posted in Air Conditioning | Comments Off on How to Judge the Quality of a Ceiling Fan? A Question From Murrysville

Save by Buying Low, Buying at the Right Time

Wednesday, July 20th, 2011

Buying a new HVAC system is a big step and a big investment. You know you will be spending a considerable amount of money, but it is worth it to get the right system for your home. However, that does not mean you should not shop around and compare prices before you buy. Prices in this industry are far from static, and you could get a great deal if you do some research and know what you are looking for.

Of course, you first have to have the luxury of being able to shop around. If your HVAC system has broken down completely, you will be much more limited on what options you can explore and how much you will pay for the system that you want.

But if you know that you are going to be replacing your existing HVAC system sometime soon, the best thing you can do is to start looking around at what is on the market now. Get a feel for the type of system that you want, the features that are important to you and what it will cost you to get all of that in one package deal.

You can also compare the prices for the same system offered by various retailers and installation companies. While it may seem like the same system should cost the same everywhere, this is often not the case. Also, different places may be offering special discounts or installation specials at different times, and you want to put yourself in the best position to take advantage of that.

The time of year can also affect the price of the system you are looking at. Buying a heating system in the middle of the summer, for instance, is often a good way to get a great deal. So if you plan ahead a little bit, you can make out big when you see the deal you were looking for.

Staying on top of the market is the best way for you to see how the prices on different systems change over time and you will be in a great position to grab a good deal when it comes up. You can also often get good deals on HVAC systems that are close to being replaced by a newer model. Just make sure that the newer model does not offer too much more than the previous year’s and you will likely come out ahead.

Continue Reading

Tags: , , ,
Posted in Home Savings | Comments Off on Save by Buying Low, Buying at the Right Time