Boehmer Heating & Cooling Blog: Archive for September, 2011

How to Add Freon to a Central Air Conditioning Unit: A Guide From Braddock

Wednesday, September 7th, 2011

An air conditioner cannot cool your Braddock home without an adequate amount of Freon. So if you’ve noticed a drop off in the cooling power of your central air conditioning system, inadequate Freon levels may be the culprit. But before you try to add more Freon to your unit, there are several things you need to know.

Low Freon Means a Leak

The truth is that your central air conditioning system should never need to be “topped off” with Freon. The coolant in your unit is part of a closed loop system and doesn’t get used up like fuel. Instead it continues to circulate through your compressor, absorbing and releasing heat to keep the air passing through it cool and comfortable.

If the level of Freon inside your air conditioner drops below the proper level, it generally means there’s a leak somewhere in your system and you’ll need a qualified professional to find that leak and make the necessary repairs.

Professional Access and Expertise

Even if you’re inclined to add Freon to your unit, you’ll probably have a hard time getting your hands on it. As an EPA regulated substance, Freon can only be purchased by EPA certified technicians. If you’re able to purchase this type of coolant for your air conditioner, you’ll need to make sure you know what type your unit uses. Most air conditioners these days use either R22 or R-134a. It’s important that you only use the type of Freon that your air conditioner is built for.

Potential for Harm

Freon is regulated so strictly because it is an extremely hazardous substance. It can harm you or your family and it can do a lot of damage if accidentally released into the atmosphere. To top everything off, if you do accidentally release it, you could be subject to some hefty EPA fines.

In extreme cases, you can do irreparable damage to your air conditioning system by trying to add Freon inappropriately or without proper training. For all of these reasons, it’s best to let a certified professional check and, if necessary, top off the Freon levels in your AC system. For the minimal cost of this service, you can avoid risking the health and safety of your family as well as that of your AC system.

Continue Reading

Why Is Ice in Central Air Conditioning a Problem? A Question From Brentwood

Monday, September 5th, 2011

If your Brentwood home’s air conditioner does not seem to be working as well as it should, your natural first reaction is to go out and take a look at the compressor to see if there is anything you can do quickly to correct the problem. Of course, you cannot assess the situation unless you know what you are looking for. For instance, if you see ice forming on the condenser coil or anywhere else on the air conditioning system, you will know you found the likely source of the problem.

Ice can form in your air conditioner for a number of reasons. The most common one is that your refrigerant levels are low. Since this refrigerant is contained in a closed system, a deficiency in refrigerant means that there must be a leak somewhere in that system. Only a certified professional can refill your refrigerant and determine where the leaks are in the system to make the necessary repairs.

Another reason that ice can develop in your air conditioner is because the air is not flowing fast enough through the system and across the coils. This can happen because of a problem with the fan or because there is an actual physical impediment to the air flow. Regardless of the reason, the ice will form because without adequate air flow the condenser coils will get too cold.

These coils are typically kept just above freezing by the constant flow of air across them. When the air passes by them at this temperature, the moisture from the air condenses on the surface of the coil. But because the coil is not quite freezing, the water then runs down into a collection pan. When the coil is too cold, however, the moisture from the air will freeze on the coil before it can run off.

This ice actually manages to insulate the coil and keeps it from properly cooling the air or removing any additional moisture. If left unattended, the ice in your central air conditioning system can cause real damage to the unit. Plus, it is not allowing the air conditioner to do its job and cool your house down. So if you notice any amount of ice at all beginning to form on any part of your air conditioner, be sure to call for professional service right away.

Continue Reading

What is the COP and Why Is It Important? A Tip From McKeesport

Friday, September 2nd, 2011

If you’ve been researching air conditioners in McKeesport, you’ve probably seen all sorts of numbers associated with each model. One of these numbers is the Coefficient of Performance (COP). While it’s good to gather as much data as you can before you make a purchasing decision, you also need to know what that data means if it’s going to help you make the best selection possible.

Measuring COP

Calculating the COP for any air conditioning model is relatively simple. The number you see displayed on the box is the ratio of energy input to cooling output. For the most part, the air conditioners you’re probably been looking at have a COP of between 2.5 and 4.0, although newer models are beginning to appear with COPs of up to 5.0.

The higher the COP, of course, the more efficient the air conditioner, so it makes sense to take this number into account when you’re making your purchase. You should also keep in mind, though, that the COP is not a constant measurement. The warmer it is outside, the lower your unit’s COP will be. However, this is standard across all units, so a relative COP comparison is still a viable evaluation method.

If you’re not sure what COP you should look for or whether a lower number will be effective for your home (especially if you only need to cool a small space), you should talk to a professional who can help you match the right COP level to your particular living space.

Improving Efficiency

While it’s always a good idea to get an air conditioner with the best energy efficiency ratings possible, that’s not the only thing you can do to reduce your energy usage and keep your cooling costs down. For instance, there are plenty of ways to keep your home naturally cooler without even turning on the air conditioner.

Even when you do need to flip it on, anything else you can do to reduce the indoor temperature will make it easier for your air conditioner to keep your house comfortable. So put up some awnings, run the ceiling fan and close the blinds to block out that harsh afternoon sun. The more you can do to reduce your indoor temperature naturally, the less your air conditioner will have to do, and the lower your cooling costs will be. If you need more information, contact a professional.

Continue Reading