Boehmer Heating & Cooling Blog: Posts Tagged ‘Heat Pumps’

Pros and Cons of Various Heating Systems in South Fayette

Wednesday, December 14th, 2011

When it comes time to install a new heating system in your South Fayette home, there are a lot of options to consider. Many people get overwhelmed when confronted with all of the furnaces, boilers and heat pumps on the market these days. So, to help you get a handle on what each has to offer and which will offer you the best benefits, here is an overview of the modern heating system market.

Furnaces

Furnaces are the core of a forced air heating system and use gas, oil or electricity to heat air which is then circulated through your home by a blower in your air handler. Furnaces are among the most fuel efficient heating systems on the market today with options available at up to 95% AFUE (meaning it uses up to 95% of the fuel consumed to produce heat). They are also inexpensive to install and while they don’t last quite as long as boilers, they are highly efficient when well cared for.

Boilers

Boilers use gas, oil or electricity to heat water or steam which is then circulated through your home into radiators or baseboard heaters. The heated water or steam releases heat into your home and heats it in turn. While not quite as energy efficient as a high efficiency furnace, boiler heat is perfect for homes with existing radiators and no room for vents and ductwork. It also has less of an impact on indoor air quality since there is no air movement and boilers tend to last a very long time when well maintained.

Heat Pumps

Heat pumps are becoming increasingly popular, especially in milder climates where it rarely gets below 40 degrees F. A heat pump uses the same technology as an air conditioner to extract heat from outside using a compressor, evaporator coils, and condenser coils with refrigerant.

It is most efficient in the spring and fall when temperatures are mild, but it uses much less energy than either a boiler or furnace and it can be used in the summer to cool your home. When properly maintained, a heat pump will last 10-20 years and save quite a bit of money, though it is recommended that you have an emergency heat source for days when the temperature outside gets below 40 degrees F.

Continue Reading

Heat Pump and Zoning or Zone Control Systems: A Tip From Bridgeville

Monday, October 3rd, 2011

When you’re putting in a heat pump in your Bridgeville home, it may also be a great time to look into having a zone control system put in as well. These types of systems can do a lot to both lower your energy bills and make your home as comfortable as possible throughout the year.

Zone control systems actually allow you to set different temperatures in different parts of your home. They use a system of dampers to direct more heat to certain areas and less to others. For instance, you may like to keep the living room nice and cozy in the winter because you’re typically just lounging around when you’re in there.

When you’re working in the kitchen, on the other hand, you’re usually generating some heat yourself from the stove and oven, so you don’t need to keep the temperature quite as high as it is in other parts of the house in order for the kitchen to remain comfortable. Of course, in the summer, these situations are likely reversed, and a zone control system will allow you to adjust accordingly.

Having the type of refined temperature control that zone control systems provide can be beneficial on several levels. It certainly helps make your home more comfortable, but it can also make it easier to reduce some of your home heating and cooling costs because you don’t have to heat or cool your whole house to keep it that way.

Zone control systems can also be a great way to end those constant thermostat battles that tend to erupt from when certain members of the household prefer one temperature, while the rest of the people in the house are more comfortable with another.

If you’re thinking of integrating a zone control system with your heat pump, you should make sure that the heat pump you get is as compatible as possible with this type of system. Most heat pumps will, in fact, work with zone control systems, but certain types are better than others.

The most important thing to look at when you’re trying to find the best heat pump to fit with a zone control system is the type of compressor the unit has. Heat pumps are available with one-speed, two-speed and multi-speed compressors and this affects how well they work at part of a zone control system. For best results, it’s good to opt for a two-speed or multi-speed compressor when you’re installing a zone control system as well.

Continue Reading

Is Geothermal for Me? A Guide From Sewickley

Friday, September 30th, 2011

Geothermal heating is a great alternative to other types of home heating systems in Sewickley. It is safe and efficient, costs very little to operate and makes use of a great renewable resource right below our feet. But is it right for you? Well, geothermal heating may be the right choice for many people, but there are many things to take into account before you can determine whether or not it is the best choice for your home.

The first important thing to understand when you are trying to decide whether or not to go with geothermal heating is how one of these systems actually works. A geothermal system heats your home by extracting heat from the ground and then transferring that heat into your indoor air. This happens when liquid, usually water or antifreeze, passes through a loop of pipes installed several feet below the ground.

The liquid absorbs heat from the ground, which in the winter is always warmer than the air, and carries is back up to an air handler inside your home where that heat is allowed to disperse into the air. Once the air is heated, the air handler blows the air through a system of ducts throughout your house, providing a constant stream of heated air to all areas of your home. The liquid, on the other hand, simply cycles back through the ground loop to pick up more heat and repeat the same cycle over again.

Because a geothermal heating system does not actually generate heat, it requires very little energy to operate. This means that it is both very cheap for you to run and environmentally friendly. But since installing a geothermal heating system involves putting pipes in underground, it can be pretty expensive initially. However, as long as the amount you save every month on your heating costs is enough to offset the high initial price of installation, it is worth it to put down the money up front.

Another alternative, of course, is a more traditional air source heat pump. These are much cheaper to install and nearly as cheap to run. However, air source heat pumps are not as efficient when the air temperature gets below freezing as a geothermal system can be. If you live in an area with harsh winters, the geothermal heat pump is a better option than an air source unit.

Continue Reading