Boehmer Heating & Cooling Blog: Posts Tagged ‘Energy Savings’

How to Make Your Heating System More Effective in South Hills

Friday, December 9th, 2011

Everyone in South Hills wants an effective heating system – one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace or boiler.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace or boiler. You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your home.

Continue Reading

How Heating Zone Control Can Save You Money: A Tip from Homestead

Wednesday, November 16th, 2011

The costs of heating your Homestead home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Continue Reading

Will Switching to Geothermal Save Me Money? A Question from Monroeville

Monday, November 7th, 2011

There are simply a ton of different types of heating systems you can have in your Monroeville home and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

When you are trying to assess whether or not switching to a geothermal heating system will save you money, you first have to start with the heating bills you currently have. Then, factor in the cost of the geothermal heat pump installation as opposed to the installation of a more conventional system.

You are then in a position to see whether or not the amount the geothermal system will save you each month is enough to offset the higher cost of installation within a reasonable amount of time. Of course, the savings will always eventually add up over time, but if the length of time it will take you to break even is the same or longer than the expected life of the system, it is probably not worth it to invest in this type of heating.

Continue Reading

Is Your Home More Valuable with Energy Efficient Appliances? A Question From Sewickley

Friday, September 16th, 2011

It’s impressive the things people do to improve the value of their Sewickley home. We’re talking about crown molding, new floors, new siding, upgrades to the landscaping and much more. The cost of upgrading these things can grow out of hand quickly and if the boost to your home’s value isn’t equally exponential, it’s hard to justify the expense.

So, it’s always nice to find a simple upgrade that can be performed for a few hundred dollars that will save you money immediately and improve the value of your home in the future. Your appliances are one such upgrade.

The Value of Energy Efficiency

An energy efficient washing machine can save upwards of $150 per year on water costs. An energy efficient toilet cuts consumption by as much as 150%. Low flow shower heads cut water costs by one third to one half and your heating and air conditioning systems can be improved by 10-35% depending on the upgrades available to you.

When you add up all those savings, the result is a tremendous amount of money that can be saved each year on everything from your water bill to your cooling needs. Imagine what happens when someone looks to buy your home. They see that there are all new appliances with energy efficient ratings that will save them money.

It’s not just lower bills; it’s a decrease in upfront investment. On the surface, it’s unlikely that your energy efficient appliances will directly increase the value of your home, but they can increase the likelihood of someone paying what you’re asking for the home. They add value to the livability of the home, if not the property itself and in today’s housing market, that’s a major plus.

Best Upgrades

The best upgrades to your home’s appliances are the ones that save money without additional work. Major upgrades to your heating and cooling are good if you need an upgrade anyway or you plan on staying in your home for a few years.

Continue Reading

Home Energy Myths: A Tip From Cranberry

Monday, September 12th, 2011

Measuring and controlling your Cranberry home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, like an Energy Star air conditioner, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. But there are some easy ways to conserve energy and if you need more information, contact your local HVAC professional.

Continue Reading

Air Conditioners and Energy Use by Percentage: A Tip From Coraopolis

Friday, September 9th, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months in Coraopolis. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

For more tips on how to keep your home cool during the last days of summer, contact your local HVAC contractor.

Continue Reading

What is the COP and Why Is It Important? A Tip From McKeesport

Friday, September 2nd, 2011

If you’ve been researching air conditioners in McKeesport, you’ve probably seen all sorts of numbers associated with each model. One of these numbers is the Coefficient of Performance (COP). While it’s good to gather as much data as you can before you make a purchasing decision, you also need to know what that data means if it’s going to help you make the best selection possible.

Measuring COP

Calculating the COP for any air conditioning model is relatively simple. The number you see displayed on the box is the ratio of energy input to cooling output. For the most part, the air conditioners you’re probably been looking at have a COP of between 2.5 and 4.0, although newer models are beginning to appear with COPs of up to 5.0.

The higher the COP, of course, the more efficient the air conditioner, so it makes sense to take this number into account when you’re making your purchase. You should also keep in mind, though, that the COP is not a constant measurement. The warmer it is outside, the lower your unit’s COP will be. However, this is standard across all units, so a relative COP comparison is still a viable evaluation method.

If you’re not sure what COP you should look for or whether a lower number will be effective for your home (especially if you only need to cool a small space), you should talk to a professional who can help you match the right COP level to your particular living space.

Improving Efficiency

While it’s always a good idea to get an air conditioner with the best energy efficiency ratings possible, that’s not the only thing you can do to reduce your energy usage and keep your cooling costs down. For instance, there are plenty of ways to keep your home naturally cooler without even turning on the air conditioner.

Even when you do need to flip it on, anything else you can do to reduce the indoor temperature will make it easier for your air conditioner to keep your house comfortable. So put up some awnings, run the ceiling fan and close the blinds to block out that harsh afternoon sun. The more you can do to reduce your indoor temperature naturally, the less your air conditioner will have to do, and the lower your cooling costs will be. If you need more information, contact a professional.

Continue Reading

Energy Efficient Home Cooling Tips From Wexford

Monday, August 22nd, 2011

Having an energy efficient air conditioning system in place is a great way to keep your Wexford house cool in the summer for less. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough inspection and maintenance of your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come.

Continue Reading

How to Reduce the Load on Your Central Air Conditioner in Monroeville

Monday, August 1st, 2011

Your central air conditioner can handle a lot, whether it is in Monroeville or Cranberry. It can keep your house cool and comfortable all summer long with only a minimum of maintenance. And if you have a newer, more energy efficient model, you probably are not even paying very much for this luxury. But no matter how good your air conditioning system is, it is always best if you can reduce its cooling load as much as possible.

Cutting down on the amount of work your central air conditioner has to do will save you money both in the short term and in the long term. You will be able to keep your house cool all summer while paying even less than you already do and you will help to extend the life of your system as well.

In general, reducing the cooling load that your air conditioner is responsible for involves keeping your house cooler by some other means. One great option when this is your goal is to have some ceiling fans installed. These help to circulate cool air and also create a breeze that can make it feel cooler even if the actual indoor temperature is the same.

With adequate ceiling fans in place, you will usually be able to turn up the thermostat on your central air conditioner and still be completely comfortable indoors. Turning up the temperature on the thermostat means that your air conditioning system will not have to work so hard because it will not have to get the indoor temperature down so low.

You can also reduce the indoor temperature in your house by blocking the sunlight that comes in and warms up the indoor air. Drawing the blinds, especially in those rooms that receive warmer afternoon sunlight will keep that sun from raising your indoor temperature. This, in turn, means that your air conditioning system will not have to work so hard to get the temperature back down.

You can also help to keep cool air inside and warmer air out by covering any doors and windows you are not likely to use with plastic. Also, check to make sure there are no cracks or drafts anywhere that may be letting in air from the outside or allowing cooler indoor air to escape. All of these things can make it possible for your air conditioner to keep your home cool without working so hard, and that will also mean that you will be paying less each month on your energy bills.

Continue Reading