Boehmer Heating & Cooling Blog: Posts Tagged ‘Heating Installation’

McKeesport Heating Question: What Is the Most Efficient Way to Heat My Home?

Monday, October 22nd, 2012

When it comes to heating, efficiency is one of the main factors most people take into consideration in McKeesport. There are quite a few different options in terms of home heating, including oil, gas and electric furnaces, heat pumps, and boilers, and each of these have their own set of advantages and disadvantages depending on your own particular situation.

For better or worse, there is no one system that is universally more energy efficient and effective than the others. The one that will turn out to be the best choice for you is the one that fits best with your specific heating needs, the climate you live in and the relative price of the fuel sources available to you.

For instance, if you live in a relatively moderate climate, a heat pump may very well be a good option for you. These systems are able to operate much more efficiently than furnaces because they extract heat from the air rather than generating it themselves. That means that in the winter, a heat pump can take heat from the outdoor air and pump it indoors to heat your home. In the summer, the heat pump can actually do the opposite, taking the excess heat from indoors and transferring it out to provide you with a yearlong temperature control solution.

Heat pumps generally run on electricity which can be expensive, but since they use so much less energy than something like an electric furnace, they can still be a very energy efficient home heating option. However, these systems are not as effective in areas with harsh, long winters, and so would likely require a supplemental heating system as well. Also, the lower the outside temperature, the less efficient a heat pump is going to be.

Furnaces, on the other hand, are quite effective at heating homes no matter how harsh or cold the climate. Gas furnaces are generally the most popular of the models available now, mostly because the cost of natural gas is lower in most areas compared to the cost of other potential fuels.

However, it may be worth considering an oil or electric furnace if these types of energy sources are relatively inexpensive in your area. No matter what type of furnace you get, you’ll be able to choose how energy efficient you want it to be as well, with lower efficiency 80% AFUE furnaces costing substantially less than those with an AFUE of 90% or more.

If you are interested in installation a new heating system in McKeesport or the surrounding area, give Boehmer Heating & Cooling a call today!

Continue Reading

Tags: , , , , , , ,
Posted in Heating | Comments Off on McKeesport Heating Question: What Is the Most Efficient Way to Heat My Home?

Pittsburgh Heating Tip: How to Check if Your HVAC System Is the Right Size

Monday, March 26th, 2012

Do you ever feel that your Pittsburgh home just doesn’t get cool enough during the warm months or warm enough during the cold months? You have tried to adjust your thermostat to the right comfort level but it just never seems right. And on top of that, you notice that your utility bills keep going up and up. Even when you dial up the thermostat in the summer and dial it down in the winter to saving on energy usage, your bills are still about the same.

You could try adding fans and shedding clothes during the warm months or wearing sweaters and crawling under a pile of blankets in the cold months. But do you really enjoy living that way? There must be another solution as to why your Pittsburgh heating and cooling (HVAC) system is just not keeping you comfortable – and affordable.

That air conditioning condensing unit sitting in your backyard and the furnace in your basement should be making your home as comfortable as possible. But in many cases, they are not.  That’s because whoever installed those HVAC system components didn’t do their homework on your home. The components were sized incorrectly. If a furnace or air conditioner is sized incorrectly, it usually cannot keep up with the demand for heat or cold and often puts such a burden on the equipment. As a result, regular failures and repair bills are commonplace.

And it may not be the fault of the installing Pittsburgh HVAC contractor. Over the years your home may have undergone renovations including additions and new windows, which have increased the square footage or demand for more heating or cooling. Those renovations may not have included upgrades to your home’s HVAC system.

So how do you check for the right size? Call a professional HVAC contractor and ask for evaluation of your home. The audit will include several key checks including a load calculation, which adds in the size of your home’s living space, number of door and windows where heat loss or gain could occur, and a check of heat loss or gain through leakage in cracks, roofs, crawlspaces, etc. An audit will determine what size of furnace or air conditioner is needed to meet the heating or cooling needs of your home and its own individual characteristics. Your HVAC contractor may also factor in the number of building occupants and normal usage patterns, i.e. having a home office or stay-at-home parent versus a working family where your home is occupied mostly at nights or on weekends.

All of these factors are considered when determining the equipment size. In air conditioning jargon, you will hear about tonnage of cooling capacity. An example may be a 2.5 ton air conditioning unit for a 2,000 square foot home. In furnace jargon, you will learn about Btu ratings, which are British thermal units. Most furnaces are sized in 20-25,000 Btu increments. Each is matched to the cooling or heating needs of your home.

Make sure you don’t hire someone who “guesstimates” how much cooling or heating capacity you need for your home. Find a qualified Pittsburgh heating and cooling professional who will make the correct calculations and who will qualify their recommendations.

For any questions about your home’s heating system, please give Boehmer Heating & Cooling a call today!

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Pittsburgh Heating Tip: How to Check if Your HVAC System Is the Right Size

Mt Lebanon Heating Installation Question: What Exactly Are High Efficiency Boilers?

Wednesday, March 7th, 2012

You have already read plenty about how energy costs are rising. You know plenty well that heating your Mt Lebanon home is a substantial expense, and that the cost of running a boiler is constantly on the rise.

But as technology has gotten better, so have boilers become more efficient at providing heat. It stands to reason that a more efficient boiler is one that costs less to run…but what does “efficient” really mean in the context of boilers? What makes a boiler “high efficiency”?

 What Is a High Efficiency Boiler?

All boilers are rated according to a standardized system of rating efficiency, called the Annual Fuel Utilization Efficiency (AFUE). Essentially, this rating tells you how much heat energy is produced by a boiler compared to how much energy it draws. The higher a boiler’s AFUE rating, the more efficient it is.

For a boiler to be called high efficiency, it must carry an AFUE of at least 90%. For basis of comparison, older systems carry an AFUE of about 70%, while mid-efficiency systems run at about 82%.

In addition, a high efficiency system has a second heat exchanger for capturing and condensing flue gases, as well as a closed combustion system.

These three things — an AFUE of 90% or above, condensing flue gases and closed combustion – define a high efficiency boiler.

The initial investment in a high efficiency boiler can be costly, but the savings over time in heating bills make it well worth the expense.

If you would like a high efficiency boiler installed in your Mt Lebanon home, give Boehmer Heating & Cooling a call today!

Continue Reading

Tags: , , , , , ,
Posted in Heating | Comments Off on Mt Lebanon Heating Installation Question: What Exactly Are High Efficiency Boilers?

Pittsburgh HVAC Installation Guide: How to Install a Programmable Thermostat

Wednesday, February 8th, 2012

Programmable thermostats are one of the best ways to save on heating costs, especially if you have a hard time remembering to turn down the heat in your Pittsburgh home. Installing a programmable thermostat will allow you to set the times you want the heat turned up or down. Not only will this make heating your home more consistent and save energy, but it will also allow you to tailor your heating needs to your schedule.

For instance, you can set the thermostat to turn on before you get up in the morning so that the house is already warm when you get out of bed, and conversely, set it to turn down after you go to bed or leave the house for work. Depending on the brand and setting options, programmable thermostats are relatively inexpensive and easy to install.

Although all styles are slightly different, here are some basic instructions that show you how easy it is to install a programmable thermostat.  Remember, this is only a general guide; always check the instructions inside the packaging of your new thermostat before you install it, or check with an electrician.

1. Remove the Old Thermostat

Before you remove the old thermostat, check to see where it’s mounted. If it’s mounted to an electrical box, the voltage used to power the old thermostat may not be compatible with the new one. Ask a certified electrician or heating technician if you aren’t sure.

CUT THE POWER TO THE HEATING SYSTEM TO AVOID ELECTRIC SHOCK. You should always turn off the main power supply to your heating system before installing any new thermostat. If you aren’t sure how to do this, ask your HVAC contractor. Once you unscrew the mounting plate for the old thermostat, just unhook the wires. Don’t throw an old mercury controlled thermostat. You should ask your local waste management facility how to properly dispose of mercury products.

2. Locate all Wires

Wrap the loose wires around a pencil to keep the wires from falling back into the wall. Identify and label each corresponding wire with a letter (do not use color coding since this is not always accurate). Strip the plastic off the ends of the wires about ¼ inch if you need to.

3. Install and Insulate Wallplate

If the area around the new wallplate is larger than the plate, insulate the hole with non-flammable insulation. Take the wallplate off the programmable thermostat and hold it against the wall to mark the screw holes with a pencil. Pull the wires through the large opening at the bottom and screw the plate to the wall.

4. Wiring

Make sure you are comfortable with wiring before you attempt to do any electrical installations. Check the manual for your programmable thermostat for instructions on wiring that specific model. In general, you’ll want to make sure you match the wire labels with the corresponding terminals on the thermostat. Sometimes there will be extra wires that aren’t needed. Always test it before completing the installation. Don’t forget the battery!

5. Install the Faceplate

Once you have it wired correctly, all you need to do is align the brackets on the faceplate with the corresponding slots on the wallplate and fasten the faceplate to the rest of the mounting. Lastly, tighten the screw at the bottom of the thermostat to hold it in place.

If you have any questions regarding programmable thermostats or would like a professional to install one in your home, give Boehmer Heating & Cooling Company a call.

 

 

 

Continue Reading

Tags: , , , , , ,
Posted in Heating | Comments Off on Pittsburgh HVAC Installation Guide: How to Install a Programmable Thermostat

Carnegie Heating Replacement Guide: Heating System Ventilation 101

Monday, January 30th, 2012

Maintaining Proper Ventilation for Combustion Systems

Anytime you maintain, retrofit, or replace a gas heating system in your Carnegie home you also need to be concerned with air quality. Combustion air is needed by all oil and gas heating systems to support the combustion process. This air is provided in some homes by unintentional air leaks, or by air ducts that connect to the outdoors. The combustion process creates several byproducts that are potentially hazardous to human health and can cause deterioration in your home. You can protect yourself from these hazards, as well as maintain energy efficiency, by ensuring that your chimney system functions properly and that your gas heating system is properly ventilated. In some cases, installing a sealed-combustion furnace can also help.

Chimneys

Properly functioning chimney systems will carry combustion byproducts out of the home. Therefore, chimney problems put you at risk of having these byproducts, such as carbon monoxide, spill into your home.

Most older gas furnaces have naturally drafting chimneys. The combustion gases exit the home through the chimney using only their buoyancy combined with the chimney’s height. Naturally drafting chimneys often have problems exhausting the combustion gases because of chimney blockage, wind or pressures inside the home that overcome the buoyancy of the gases.

Atmospheric, open-combustion furnaces, as well as fan-assisted furnaces, should be vented into masonry chimneys, metal double-wall chimneys, or another type of manufactured chimney. Masonry chimneys should have a fireclay, masonry liner or a retrofitted metal flue liner.

Many older chimneys have deteriorated liners or no liners at all and must be relined during furnace replacement. A chimney should be relined when any of the following changes are made to the combustion heating system:

When you replace an older furnace with a newer one that has an AFUE of 80% or more. These mid-efficiency appliances have a greater risk of depositing acidic condensation droplets in chimneys, and the chimneys must be prepared to handle this corrosive threat. The new chimney liner should be sized to accommodate both the new heating appliance and the combustion water heater by the installer.

When you replace an older furnace with a new 90+ AFUE appliance or a heat pump. In this case, the heating appliance will no longer vent into the old chimney, and the combustion water heater will now vent through an oversized chimney. This oversized chimney can lead to condensation and inadequate draft. The new chimney liner should be sized for the water heater alone, or the water heater in some cases can be vented directly through the wall.

Other Ventilation Concerns

Some fan-assisted, non-condensing furnaces, installed between 1987 and 1993, may be vented horizontally through high-temperature plastic vent pipe (not PVC pipe, which is safely used in condensing furnaces). This type of venting has been recalled and should be replaced by stainless steel vent pipe. If horizontal venting was used, an additional draft-inducing fan may be needed near the vent outlet to create adequate draft. Floor furnaces may have special venting problems because their vent connector exits the furnace close to the floor and may travel 10 to 30 feet before reaching a chimney. Check to see if this type of venting or the floor furnace itself needs replacement. If you smell gases, you have a venting problem that could affect your health. Contact your local utility or Carnegie heating contractor to have this venting problem repaired immediately.

Chimneys can be expensive to repair, and may help justify installing new heating equipment that won’t use the existing chimney.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Carnegie Heating Replacement Guide: Heating System Ventilation 101

Pros and Cons of Various Heating Systems in South Fayette

Wednesday, December 14th, 2011

When it comes time to install a new heating system in your South Fayette home, there are a lot of options to consider. Many people get overwhelmed when confronted with all of the furnaces, boilers and heat pumps on the market these days. So, to help you get a handle on what each has to offer and which will offer you the best benefits, here is an overview of the modern heating system market.

Furnaces

Furnaces are the core of a forced air heating system and use gas, oil or electricity to heat air which is then circulated through your home by a blower in your air handler. Furnaces are among the most fuel efficient heating systems on the market today with options available at up to 95% AFUE (meaning it uses up to 95% of the fuel consumed to produce heat). They are also inexpensive to install and while they don’t last quite as long as boilers, they are highly efficient when well cared for.

Boilers

Boilers use gas, oil or electricity to heat water or steam which is then circulated through your home into radiators or baseboard heaters. The heated water or steam releases heat into your home and heats it in turn. While not quite as energy efficient as a high efficiency furnace, boiler heat is perfect for homes with existing radiators and no room for vents and ductwork. It also has less of an impact on indoor air quality since there is no air movement and boilers tend to last a very long time when well maintained.

Heat Pumps

Heat pumps are becoming increasingly popular, especially in milder climates where it rarely gets below 40 degrees F. A heat pump uses the same technology as an air conditioner to extract heat from outside using a compressor, evaporator coils, and condenser coils with refrigerant.

It is most efficient in the spring and fall when temperatures are mild, but it uses much less energy than either a boiler or furnace and it can be used in the summer to cool your home. When properly maintained, a heat pump will last 10-20 years and save quite a bit of money, though it is recommended that you have an emergency heat source for days when the temperature outside gets below 40 degrees F.

Continue Reading

Tags: , , , , , , ,
Posted in Heating | Comments Off on Pros and Cons of Various Heating Systems in South Fayette

What Size Furnace is Right for My Home? A Question from Coraopolis

Monday, November 21st, 2011

When it comes to your Coraopolis home’s heating equipment, the right size is very important. If your furnace is sized correctly, you will enjoy a high level of indoor comfort, which you should. However, an incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on What Size Furnace is Right for My Home? A Question from Coraopolis

Testimonial – Harry from Pittsburg

Friday, November 18th, 2011

Harry from Pittsburg as impressed by our heat pump installation service; here is what he wrote to us:

“Thank you for efficient and careful installation of our new heat pump. The guys were great – professional, courteous, and so neat! Thanks to Steve for excellent advice.”

– Harry I.

Thanks Harry! And if you ever need any heat pump maintenance or repair, don’t hesitate to give us a call!

Continue Reading

Tags: , ,
Posted in Heat Pumps | Comments Off on Testimonial – Harry from Pittsburg