Posts Tagged ‘Monroeville’

Pittsburgh Air Conditioning Maintenance Tip: When Should You Check Your AC Filters

Monday, April 9th, 2012

The filters on your Pittsburgh air conditioning unit are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a Pittsburgh air conditioning professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work. If you need a complete tune-up for your air conditioner, give Boehmer Heating & Cooling a call today!

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Mt Lebanon Heating Installation Question: What Exactly Are High Efficiency Boilers?

Wednesday, March 7th, 2012

You have already read plenty about how energy costs are rising. You know plenty well that heating your Mt Lebanon home is a substantial expense, and that the cost of running a boiler is constantly on the rise.

But as technology has gotten better, so have boilers become more efficient at providing heat. It stands to reason that a more efficient boiler is one that costs less to run…but what does “efficient” really mean in the context of boilers? What makes a boiler “high efficiency”?

 What Is a High Efficiency Boiler?

All boilers are rated according to a standardized system of rating efficiency, called the Annual Fuel Utilization Efficiency (AFUE). Essentially, this rating tells you how much heat energy is produced by a boiler compared to how much energy it draws. The higher a boiler’s AFUE rating, the more efficient it is.

For a boiler to be called high efficiency, it must carry an AFUE of at least 90%. For basis of comparison, older systems carry an AFUE of about 70%, while mid-efficiency systems run at about 82%.

In addition, a high efficiency system has a second heat exchanger for capturing and condensing flue gases, as well as a closed combustion system.

These three things — an AFUE of 90% or above, condensing flue gases and closed combustion – define a high efficiency boiler.

The initial investment in a high efficiency boiler can be costly, but the savings over time in heating bills make it well worth the expense.

If you would like a high efficiency boiler installed in your Mt Lebanon home, give Boehmer Heating & Cooling a call today!

Tags: , , , , , ,
Posted in Heating | Comments Off

Upper St Clair HVAC Contractor Tip: The Energy Star Label

Wednesday, January 11th, 2012

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers, including Upper St Clair homeowners, save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Will Switching to Geothermal Save Me Money? A Question from Monroeville

Monday, November 7th, 2011

There are simply a ton of different types of heating systems you can have in your Monroeville home and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

When you are trying to assess whether or not switching to a geothermal heating system will save you money, you first have to start with the heating bills you currently have. Then, factor in the cost of the geothermal heat pump installation as opposed to the installation of a more conventional system.

You are then in a position to see whether or not the amount the geothermal system will save you each month is enough to offset the higher cost of installation within a reasonable amount of time. Of course, the savings will always eventually add up over time, but if the length of time it will take you to break even is the same or longer than the expected life of the system, it is probably not worth it to invest in this type of heating.

Tags: , , , , , ,
Posted in Geothermal | Comments Off

IAQ – To Zone or Not to Zone my Home Comfort: Some Pointers From Elizabeth

Friday, September 23rd, 2011

There are a lot of decisions to make related to your Elizabeth home’s comfort system. You must decide what type of heating you want, how you’ll implement air conditioning, and then how to keep all of that heated and cooled air clean and healthy in your home.

On top of everything else, you have the option to implement zone control in your house to provide multiple comfort levels for each member of your family. Zone control systems are growing rapidly in popularity because they allow home owners to enjoy an enhanced level of comfort throughout the day, while not negatively impacting any one person.

For example, if it’s chilly outside and you need to turn your heater on, that doesn’t mean everyone in the house wants the thermostat set to 72°F. There are a few reasons for this. You may be in the kitchen, working over the stove or doing dishes where there is plenty of heat to keep you warm. More warm air coming through vents or radiators isn’t going to make you comfortable.

The second floor of a home traditionally needs less heat because warm air on the first floor rises and fills that space. The same is true in the summer when cool air settles in lower floors. Having a zone control system allows you to set specific temperatures in each room which are then controlled by your home heating system. You can even turn off the heating and cooling in a specific room like your office or the attic if it will be empty for long periods of time.

Other Considerations

A zone control system is good for comfort, but also for the overall air quality of your home. Too much conditioned air moving through your ducts carries more allergens and contaminants into your home and causes your air quality system to work harder. Your ventilation system will be asked to work harder as well.

Ideally, a good home air quality system is designed to use as little conditioned air as possible to keep everyone comfortable. A zone control system does this very effectively. When talking to a professional about a new installation, check to find out about programmable thermostats as well. These can make it easier to set and forget the temperature in rooms that are only used for a few hours each day.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

How to Reduce the Load on Your Central Air Conditioner in Monroeville

Monday, August 1st, 2011

Your central air conditioner can handle a lot, whether it is in Monroeville or Cranberry. It can keep your house cool and comfortable all summer long with only a minimum of maintenance. And if you have a newer, more energy efficient model, you probably are not even paying very much for this luxury. But no matter how good your air conditioning system is, it is always best if you can reduce its cooling load as much as possible.

Cutting down on the amount of work your central air conditioner has to do will save you money both in the short term and in the long term. You will be able to keep your house cool all summer while paying even less than you already do and you will help to extend the life of your system as well.

In general, reducing the cooling load that your air conditioner is responsible for involves keeping your house cooler by some other means. One great option when this is your goal is to have some ceiling fans installed. These help to circulate cool air and also create a breeze that can make it feel cooler even if the actual indoor temperature is the same.

With adequate ceiling fans in place, you will usually be able to turn up the thermostat on your central air conditioner and still be completely comfortable indoors. Turning up the temperature on the thermostat means that your air conditioning system will not have to work so hard because it will not have to get the indoor temperature down so low.

You can also reduce the indoor temperature in your house by blocking the sunlight that comes in and warms up the indoor air. Drawing the blinds, especially in those rooms that receive warmer afternoon sunlight will keep that sun from raising your indoor temperature. This, in turn, means that your air conditioning system will not have to work so hard to get the temperature back down.

You can also help to keep cool air inside and warmer air out by covering any doors and windows you are not likely to use with plastic. Also, check to make sure there are no cracks or drafts anywhere that may be letting in air from the outside or allowing cooler indoor air to escape. All of these things can make it possible for your air conditioner to keep your home cool without working so hard, and that will also mean that you will be paying less each month on your energy bills.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

What Is the Single Biggest Money-Saver Upgrade You Can Make?

Friday, July 15th, 2011

While it would be great if there was a simple answer to this question, the real right answer depends to a great extent on your own particular situation. There are literally dozens of steps you can take to save on your home heating and cooling costs, and which ones are most appropriate for you will have a lot to do with what you already have, how you use it and where you live.

For instance, if you have a well-insulated house but your HVAC system is more than 10 or 15 years old, investing in a new system will almost certainly save you a ton in the long run. Even if your existing system is working well, the newer systems available are simply so much more energy efficient that having one will cut your monthly bills dramatically.

Plus, you will be replacing your system relatively soon anyway if it is that old, so you might as well start saving now on your heating and cooling costs. However, even the best heating and cooling system on the market will not save you that much money if you do not have a properly insulated and sealed house.

Insulation keeps the warm air in during the winter, and it also keeps colder air from seeping in. In the summer, it works the other way around, keeping in the air you are paying to cool and keeping out the hotter outside air. If you do not have thorough insulation or if it is too old, that temperature controlled air that you are paying for will be leaking out and unwanted outdoor air will be finding its way in. You will pay much more than necessary to keep the indoor temperature comfortable as a result.

If you have both good insulation and an energy efficient HVAC system, your thermostat might be the place to look when you want to try and cut your energy costs. A programmable or wireless thermostat might be just the ticket you need to cut back even more on your energy bills because of the added control it gives you to more precisely regulate the temperature inside your home.

Particularly if you have a large house, you might even consider having a zone control system put in so that you can set different temperatures for different areas of the house. After all, there is no need to be paying to regulate the temperature in a part of the house that is unoccupied.

Tags: , , ,
Posted in Energy Savings | Comments Off

Tips for Upgrading Your Central Air Conditioner

Monday, June 13th, 2011

When the time comes to upgrade your central air conditioner, you will have a lot of things to take into account. If you were generally satisfied with the performance of your old system, it can be very tempting to stick with a similar model. But if you do not examine all of the options out there right now, you may very well be missing out on a great deal.

If you already have a central air conditioner in place, chances are that you also have ductwork throughout your house. In that case, you will probably be better off with a packaged air conditioner as opposed to a split system. If it is a split system you are replacing, however, you should probably keep your search limited to other split systems. Installing a packaged air conditioner when you do not already have ducts in place can dramatically increase the overall cost of the project.

You will also want to make sure that the system you choose is compatible with the heating system and air handler that you already have in place. Most central air conditioning systems can be integrated easily with all types of heating systems, but you should still check to make sure this will not be a problem, particularly if you have an older heating system.

In terms of picking out the right new system for your home, energy efficiency is probably the main factor to consider. While just about every air conditioner on the market right now will be much more efficient than the unit you are replacing, you want to make sure you get a model that will provide you with the optimal savings in the long run.

This does not necessarily mean that you should go out and buy the most energy efficient air conditioner out there. In fact, because the more energy efficient units are also typically more expensive, you may not actually save money by going that route. But you will do well to choose a unit that will save you enough monthly to offset the installation costs and for most people, that means that you will want an air conditioner that is either a SEER 14 or SEER 16.

Of course, the actual amount of money you will save as you move up through the SEER rankings depends on how much you use your air conditioner to begin with. If you live somewhere with very hot weather and you use your unit for a large chunk of the year, it may very well be worth it for you to opt for a very high efficiency model.

Tags: , ,
Posted in Air Conditioning | Comments Off

What Can You Do Yourself if Your Central AC Unit Does Not Work? When Should You Call a Professional?

Wednesday, June 8th, 2011

If your air conditioning system suddenly stops working or is not keeping your house as cool as you think it should, the chances are good that you will have to call in a professional to make the necessary repairs and get you back on track. However, there are a few things you can do on your own before you make that call to ensure that this really is something you cannot take care of on your own.

While it may seem obvious, the first thing you should check is the thermostat to make sure that it is set to a temperature that will trigger the air conditioning to come on. If your thermostat for some reason is set too high, then the air conditioner will not receive the signal to start cooling the house. This is an easy fix, of course, and you will be back up and running in no time.

If the thermostat is indeed set where it should be, the next thing to check is the air filter. Most people with central air conditioning know that they should change the filter once every month or so, but this seldom actually happens.

If it has been a while since your air filter was changed, there is a good chance that it is clogged and therefore blocking air from circulating from the air conditioner through the rest of the house. This is an easy enough fix, as all you need to do is replace the current air filter and your system should be able to pick up right where it left of. However, if the blocked air filter has also caused ice to form behind it, you may have to wait for a couple of hours until the ice has a chance to thaw.

Next, you will want to check and make sure that the air conditioning system is actually getting power. Look to see if any of the breakers are tripped or if there may have been a current interruption for any other reason that is within your power to fix. If this is the case, though, it is a good idea to turn the air conditioning system off before you attempt to restore the power.

If none of these measures are able to get your air conditioning system up and running again, you should not hesitate to call a professional. Many air conditioning repairs are quite basic, but they still need to be performed by a licensed professional.

Tags: , , ,
Posted in Air Conditioning | Comments Off